| Have More Questions? |
Call toll-free (800) 222-4700 or
click here to email a Sweetwater Sales Engineer about the ART Clean Box II. |
|
|
CleanBOX II - Escape The HUM!
Welcome to the CleanBOX II from ART! "Hum" in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called "ground loops". The safest way to eliminate unwanted noise is with ART's CleanBOX II.
Some examples of Ground Loops:
- The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer's ground, then into a mixer's power ground.
- The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit.
- The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp's power ground.
The CleanBOX II from ART easily removes ground loops without any signal degradation!
| Customer Reviews |
Recommended by Daniel from Knoxville, TN, January 01, 2005
“Is cheap, small, and it works great! Used at a church, with excellent results. I believe it works better than the 'Ebtech hum eliminator'.”
|
| • Write Your Own Review |
Tell a Friend About the Clean Box II!
Print This Page
See Also: Direct Interface Boxes
|